What Is the MultiPulse® PRO?
Asclepion’s MultiPulse® PRO is a 10,600nm CO₂ laser designed for both aesthetic dermatology and dermatological surgery. It uses a radio-frequency (RF) excited laser source and delivers up to 60W of power. A single platform performs full-field ablation through its handpieces and fractional resurfacing through the HiScan SVR scanner.
Asclepion’s Dynamic Pulse Control (DPC) technology lets you shape each pulse, deciding how much energy goes into ablating tissue and how much goes into heating the dermis below. That balance shapes the tissue effect, whether the aim is to vaporise a lesion cleanly, remodel an atrophic scar or tighten periorbital skin. With five pulse modes, five stacking levels and three scan patterns, you get a wide working range from one device.
MultiPulse® PRO Treatment Indications
CO₂ laser energy is absorbed by the water in skin tissue. It ablates the target while delivering a controlled thermal effect to the surrounding dermis. That pairing of ablation and heat suits the MultiPulse PRO for a broad mix of aesthetic and dermatological work.
Skin Resurfacing
Fractional or fully ablative resurfacing to improve skin texture, fine lines and overall skin quality. Adjusting the scanner pitch moves you between the two approaches without changing the device.
Skin Rejuvenation
Fractional treatment ablates microscopic columns of tissue and leaves the skin between them intact. Those untreated areas speed healing, and most patients return to their daily activities within a few days.
Scar Treatment
Atrophic scars from acne, chickenpox or injury can affect both the look and the texture of the skin. DP mode creates a wedge-shaped zone of ablation and heating in the dermis, designed for targeted remodelling of scar tissue.
Lesion Removal
Precise vaporisation of benign skin lesions such as fibromas and naevi, as well as treatment of actinic cheilitis. The handpieces and fine optics give close control at the margins.
Rhinophyma
Rhinophyma calls for tissue removal and reshaping with effective bleeding control. CO₂ coagulates small vessels as it ablates, which helps keep the treatment field clear.
Laser Blepharoplasty and Periorbital Lines
The MultiPulse PRO supports bloodless laser blepharoplasty and the treatment of periorbital wrinkles, two of the most requested treatments around the eyes.
Dynamic Pulse Control (DPC) Technology
A CO₂ pulse both ablates tissue and creates a thermal effect. Dynamic Pulse Control lets the practitioner vary the balance between the two rather than working with a single fixed pulse profile. MultiPulse PRO offers four pulse shapes plus continuous wave, producing different depths and patterns of tissue effect. You can match the pulse to the indication, the treatment area and the patient in front of you.
SP Mode (Standard Pulse)
A gentle ablation peak followed by a heating phase. The epidermis is ablated while the tissue underneath is warmed, which suits indications in the papillary dermis.
DP Mode (Deep Pulse)
A high ablation peak with a selectable heating phase. Together, they form a wedge-shaped zone in the dermis, used for targeted tissue remodelling in atrophic scars and periorbital wrinkles.
UP Mode (Ultimate Pulse)
The highest ablation peak and the shortest pulse, for precise ablation. Depending on the power setting, it works at the surface or at deeper levels. It’s indicated for scars and for wrinkles without skin laxity.
HP Mode (High Pulse)
HP uses short, high-frequency pulses to produce superficial ablation alongside a thermal effect. It is intended for procedures including rhinophyma treatment and laser blepharoplasty.
CW Mode
Continuous-wave output, available with the handpieces.
Fractional or Full Ablation From One Scanner
The HiScan SVR (Skin Versatility Resurfacing) scanner pairs with the Frax Terminal SVR to give you full control over how energy lands on the skin. Pitch, the spacing between spots, adjusts from 0 to 2,000μm. Close the pitch right down for fully ablative coverage, or open it up to leave bridges of untreated skin for fractional work. The scan area is up to 15 × 15mm, with dwell time ranging from 100 to 2,000μs.
Stacking delivers repeated pulses to the same point, allowing ablation depth to be increased in controlled steps. Five levels are available.
Normal, Interlaced and Randomized modes change the order in which spots are delivered. Randomized mode separates adjacent pulses to reduce localised heat build-up across the treatment area.
Handpieces, Optics and Spacers
Handpieces handle full-field ablation and fine detail work. A 7.0″ handpiece is supplied as standard, with 1.5″, 2.0″, 4.0″ and collimated options available. Across the range of optics, spot size runs from 0.125mm to 2mm.
Interchangeable spacers keep the working distance consistent for each type of treatment. They’re quick to change and can be sterilised, as can the handpieces, which are also easy to swap and clean between patients.
Workstation Features
RF CO₂ Laser Source
The RF-excited source provides stable pulse timing for precise control of laser power. The RF tube also has a longer service life than conventional CO₂ laser sources.
360° Articulated Mirror Arm
The long articulated arm balances the handpieces and scanner, so they move freely during treatment. It folds back and locks for transport.
8.4″ Touchscreen
A sharp, responsive touchscreen with a modern interface keeps parameter changes quick between treatment steps.
Up to 60 Watts
The MultiPulse PRO delivers up to 60W of power.
Compact Footprint
The workstation takes up 42 × 54cm of floor space and weighs around 70kg.
Real-Life MultiPulse® PRO Results
Naevus cell naevus. © Dr Karolina Kykalova, Prague, Czech Republic.
Fibroma. © Dr Karolina Kykalova, Prague, Czech Republic.
Actinic cheilitis. © Prof. Dr Peter Arne Gerber, Düsseldorf, Germany.
Rhinophyma after CO₂ laser treatment. © Dr Andreas Ott, Rehau, Germany.
Accident scar. © Dr Andreas Ott, Rehau, Germany.
CO₂ or Er:YAG? MultiPulse® PRO vs Cool Laser
We manufacture and suply both a CO₂ laser, the MultiPulse, and an Er:YAG laser, the Cool Laser. Both are ablative and both target water in the skin, but they leave very different amounts of heat behind.
Er:YAG at 2,940nm is absorbed far more strongly by water, so it removes tissue in fine layers with very little residual heat. That’s why Cool Laser is described as “cold” ablation.
CO₂ at 10,600 nm deposits more heat into the surrounding tissue. The extra heat coagulates small blood vessels, creating a drier treatment field, while also contracting collagen to support tissue tightening and remodelling. Neither is better across the board. The right choice depends on the indications you treat, your patients and how you want to manage recovery, and some clinics run both.
MultiPulse® PRO vs Cool Laser Comparison Table
MultiPulse® PRO vs Cool Laser
Laser type
CO2, RF excited.
Er:YAG.
Wavelength
10,600nm.
2,940nm.
Tissue effect
Ablation with an adjustable thermal effect.
Precise ablation with minimal thermal spread, plus thermal modes.
Bleeding control
Coagulates as it ablates.
Less coagulation in cold ablation modes.
Pulse control
Dynamic Pulse Control, 0.5µs–86ms.
100–1,500µs.
Delivery
HiScan SVR scanner plus handpieces.
Six specialised handpieces.
Distinctive indications
Rhinophyma, bloodless blepharoplasty and lesion vaporisation.
Snoring (Romeo), intravaginal (Juliet) and fine resurfacing.
Display
8.4" touchscreen.
10.1" touchscreen.
Weight
Approx. 70kg.
Approx. 115kg.
MultiPulse® PRO Frequently Asked Questions
MultiPulse® PRO Technical Specifications
MultiPulse® PRO Technical Specifications
Laser
CO2, RF excited, Class 4
Wavelength
10,600nm
Power
60W
Pulse modes
Ultimate Pulse (UP), Deep Pulse (DP), Standard Pulse (SP), High Pulse (HP) and CW (handpieces only)
Pulse duration
0.5µs–86ms
Display
8.4" LCD touchscreen
Handpieces
Standard 7.0". Optional 1.5", 2.0", 4.0" and collimated
Spot size (optics)
0.125–2mm
Scanner
HiScan SVR with Frax Terminal SVR
Scan area
15 × 15mm
Pitch
0–2,000µm
Dwell time
100–2,000µs
Scan modes
Normal, Interlaced and Randomized
Stacking
5 levels
Dimensions (W × D × H)
42 × 54 × 154cm with arm folded
Weight
Approx. 70kg
Contact an Asclepion Product Expert
Let an Asclepion expert show you how the MultiPulse PRO can help transform your patients – and your clinic.
The Asclepion
A-List Package
Designed with your clinic in mind, receive:
- 2-year Warranty*
- Market Leading Education & Training
- Ongoing Clinical and Technical Support
- Complimentary Access to Asclepion Academy and Asclepion WebClub
with every Asclepion device.
* 2-year warranty includes 1-year parts & labour and then 1-year parts only. Handpieces have a 1-year warranty.
Not sure which device is right for your clinic?
Give us a call on 020 7193 2003 or email us at hello@asclepionuk.com!
Why Choose Asclepion?
Over 48 years of experience within the laser industry.
Revolutionary technology for the latest aesthetic treatments.
Expert training for your clinic staff with all devices.
Global footprint, trusted by thousands of clinics worldwide.
Comprehensive support & device servicing available.
